KHEMIX 106 ALUMINIUM SHINE

K106 ALUMINIUM SHINE
GROUND TRANSPORTATION ALUMINIUM BTIGHTENER

Cleans and brightens aluminum parts
Removes anodic or chromate coatings
Cleans aluminum vans and trucks

PRODUCT INFORMATION (description))
An acidic liquid designed for use as aluminum deoxidizer. An acid with a pH of less than one, and will etch most metals.

APPLICATION: (uses)
Designed for the removal of anodic or chromate coatings on aluminum. It is also used for the general cleaning, brightening and etching of raw aluminum parts. Used for cleaning and brightening of aluminum vans and trucks.

EFFECTIVENESS: (directions)
For truck and van cleaning, dilute with one to forty parts of water. The solution may be either brushed or sprayed on and allowed to dwell until a foam blanket occurs. The surface should be water rinsed and in some instances, it is required to agitate the surface prior to rinsing.
This depends, however, entirely on the aluminum alloy which is being brightened, some alloys do not require brushing before final rinsing.
The surface being cleaned should be worked form the bottom up, keeping the surface wet.
A subsequent spray of D-Smut PC, approximately two ounces per gallon will prevent smutting on aluminum vans.

SAFETY: (note)
This product is non-flammable and non-explosive, however, precautions should be observed, as in the handing of all acids. Goggles and rubber gloves, and protective clothing should be worn. In the event of contact with the skin, it is suggested that the area be flooded with water and a doctor be consulted. Do not spray on glass or plexiglass.