SPEC 201 NON LEAD HIGH TEMP GREASE

SPEC’99 – 201, IS A NON METALLIC, NON LEAD, HEAVY DUTY, HIGH TEMPERATURE SPECIAL PURPOSE GREASE.


FEATURES:
· Non melt, heat resistant up to 1,300 °C · Withstand Extreme Pressure conditions
· Lowers friction and reduces torque · An alternate as Anti seize compound
· Environmentally safe, contain no hazardous ingredients · Will not harden, drip or separate
· Extended re-lubrication interval, reach 5,000 hours · Ideally for baking ovens


PRODUCT INFORMATION

SPEC’99 - 201 is the industry's finest, field proven, heavy duty, high temperature, multi purpose grease. It is designed for multi-use plant wide application for use in plain bearings, ant-friction bearings, and grease-lubricated gears and couplings. SPEC’99 - 201 is a high temperature, long life grease for rolling bearings in some examples like;

· Bearing assemblies in electric motors and fans · Running wheel on oven and autoclave carts
· Load and turn rollers in conveyors, automotive bakery ovens · Dry kilns

EXCEPTIONAL THERMAL STABILITY SPEC - 201 has extreme heat resistant up to 1,300 °C, temperature plays an important role in the lubrication of rolling bearings, SPEC - 201 special develop for non carbon formation or polymerization purpose.

ENVIRONMENTALLY SAFE SPEC- 201 contain no metallic, non hazardous ingredients , no toxic fume, unlike some extreme high temperature performance grease that made from toxic ingredients that will create toxic fume under the high temperature operation.

EXTREME PRESSURE SPEC - 201 excellent in withstanding extreme load, cannot be extruded from lubricating interface areas by sudden shock loads and extreme pressures, lowest friction, reduces torque, superior operating reliability for enclosed load and turn rollers in endless conveyors – drying, painting and stoving systems.

EXTENDED SERVICE LIFE SPEC - 201 coupled with water resistant properties, rust and corrosion inhibitors in a high temperature performance, it service life can reach 5,000 hours firmly.

AS AN ANTI-SEIZE COMPOUND SPEC - 201 can be an alternate as ANTI SEIZE compound for all bolts & nuts , bushings, centres, cam rollers, chain, slow moving drives, dies, drills, gaskets, gears, generators, joints, keyways, motors, packings, plugs, press fits, pumps, shafts, sleeves, slides, spark plugs, studs, taps, unions, valve stems, wristspins, etc…..

TYPICAL SPECIFICATIONS

Penetration @ 77 F., ASTM Worked…………………… 270-290
Dropping Point, ASTM, F,……………………………… None
Timken OK Load……………………………….………. 60
Base Oil Data ;
Viscosity
cSt@ 40 °C………………………………………… 66
cSt@ 100 °C……………………………………….. 8.7
Oxidation Stability, lbs loss in 100hrs………….………. 5
Water washout, % loss after 2hrs @ 175°F…….………. 5
Rust Prevention ……………………………………... Pass