SPEC 227 EP MILLS GREASE

SPECIALLY FORMULATED EP GREASE FOR MILLS APPLICATION !!!

FEATURES:

Superb Resistant To Water Washout
Proprietor EP Protection Additive Systemw
Heat Resistant Up to 260ºC
Superior Rust & Corrosion Protectionw
Excellent Shear Stabilityw
Un-surpass Anti Oxidation Characteristicw
Environmental Responsibility

PRODUCT INFORMATION

Superb Resistant To Water Washout - 227 EP Mills Grease was specially fortified for water washout resistant, it has strong adhering characteristic, would not easily wash away from high pressure water spray.

Proprietor EP Protection Additive System – 227 EP Mills Grease contain our proprietor EP additive package to withstand high shock load impact, yet providing excellent lubrication.

Heat Resistant – 227 EP Mills Grease has an operating temperature range -40 ̊C to 260 ̊C once in the application, it result very much depending on the application method and frequency of application.

Superior Rust & Corrosion Protection – 227 EP Mills Grease has one of the outstanding characteristic is stubbornly protect components from corrosion attack.

Excellent Shear Stability – 227 EP Mills Grease has strong texture to stay put on the metal surface even it was shearing for a long period of operating.

Un-surpassed Anti Oxidation Characteristic – 227 EP Mills Grease was enhanced with anti oxidation additive package to keep the grease work longer.

Environmental Responsibility – 227 EP Mills Grease contain no metals or any others environmental undesirable additives.



APPLICATION:

Widely recommended for multi application in Steel Mills, Paper Mills, Aluminum Smelting Mills, Foundries, Cement Plants, Power Plant, Marine, Mining, Offshore Rigs….etc.

Generally applied on rolling equipments, rolling elements in blowers and centrifugal pump, rock crushing equipments ; jaw crushers, plain journal bearings, best perform under adverse condition such like ; highly moisture, high temperature, heavy shock load and dusty environment.

TYPICAL SPECIFICATION:

SPECIFICATION TEST NO. 2 NO. 3
PENETRATION 25 ºC WP 255-280 220-250
DROPPING POINT, °C OVER 250 OVER 250
COPPER CORROSION 100 ºC HR 24 HR NO COLOUR CHANGE (TO GREEN OR BLACK) INCOPPER
EVAPORATION LOSS, wt % 99 ºC 22 HR LESS 2.00 LESS 2.00
OIL SEPARATION, wt % 100 ºC 24 HR LESS 5.00 LESS 5.00
OXIDATION STABILITY. MPA (Kgf/cm2) 99 ºC 100 HR LESS 0.069 (0.7) LESS 0.069 (0.7)
WATER WASHOUT RESISTANCE, wt % 38 ºC 1 HR LESS 10 LESS 10
LEAKAGE TENDENCY.G 104 ºC 6 HR LESS 10 LESS 10
HIGH TEMP, LOW SPEED WITHIN +50 WITHIN +50
SHELL ROLL TEST (130ºC 10 RPM 20H) WITHIN +50 WITHIN +50
FLASH POINT ºC COC 180-260 180-260
BASE OIL CONTENT, wt % OVER 80 OVER 75
TIMKEN OK LOAD, lb OVER 30 OVER 30
SOAP LITHIUM LITHIUM
APPEARANCE TRANSPARENT TRANSPARENT