SPEC 255 ULTRA OPEN GEAR LUBRICANT

SPEC’99 – 255,A REVOLUTIONARY LUBRICANT FOR
OPEN GEAR, TO SOLVE ONE OF THE TOUGHEST
LUBRICATION PROBLEM FOR TODAY INDUSTRY.

FEATURES:

SPEC’99 - 255 has tremendous adhesive and cohesive characteristics, with the advance additives that give you re-lubrication with every turn of the gears.
* Great shear stability, to prevent “sling off ” from gear teeth
* Total water “wash - out ” resistance
* Climatically stable
* A natural E.P. stringiness enhanced to the metal surface withstand load
* Anti - corrosion and oxidation
* Need only a thin layer application, long lasting and economical


PRODUCT INFORMATION

SPEC’99 - 255 is an open gear lubricant specially formulated to withstand high load and shearing of open gears, fifth wheels and heavy duty equipment.

SHEAR STABILITY CHARACTERISTIC: SPEC’99 - 255 has an excellent shearing capability under the most toughest wiping and sliding actions, as it will provide a superior hydrodynamic film to prevent scuffing, pitting, galling, scoring, rippling and clawing.

TOTAL WATER RESISTANCE: SPEC’99 - 255 is totally water “ wash - out ” resistance, especially operate under the critical open condition, where there is always has rain and water pressure contact.

CLIMATICALLY STABLE: SPEC’99 - 255 doesn’t thin off easily during high temperatures operation and will not become harden during the low temperature operation.

EXTREME PRESSURE CHARACTERISTIC: SPEC’99 - 255 has a natural E.P. stringiness adhere to the metal surface to resist, Shock, Meshing, Start-up, Loading, Brake seizure, Squeeze out, Pressure and Ratio alteration.

SUPERB HIGH FILM STRENGTH: The stringy lubricating substance is pulled over subsequent gears and actually re-lubricate the gears. This process will prevents metal to metal contact with each revolution of the gear.

WIDE APPLICATION: SPEC’99 - 255 has unlimited application in open gear equipment: Cranes, hoists, wind-pumps, water pumps, winches, timber drags, rail pulleys, funiculars, cable ways, ski lifts, rotary kilns, shovels and thousands of construction equipment and plant machinery.


TYPICAL SPECIFICATION:

FLASH POINT, COC, (ºF )……………………………. 255-295
DROPPING POINT, ASTM, ºC (ºF)………………….. NONE – MELT
FLASH POINT, COC, (ºF )……………………………. 90
BASE OIL DATA:
VISCOSITY @ 210 ºF, SUS………………….. 850-950
VISCOSITY @ 100 ºF, SUS………………….. 1900-2000
TIMKEN OK LOAD…………………………………... 40
RUST PREVENTION…………………………. PASS
SHELL ROLL STABILITY, POINT CHANGE 10.0