SPEC 266 WEATHER GUARD HEAVY DUTY GREASE

SPEC’99 - 266, An Universal Weather Proof Grease For Harsh Environment.

FEATURES:
· Excellent Corrosion Protection
· High Extreme Pressure Capability
· Wide Temperature Operation
· Protect From “Shock Load” Impact
· Stubbornly Resist Salt & Fresh Water
· Oxidation & Thermal Stability
· Environmentally Conscious

PRODUCT INFORMATION

SPEC 266 is made from our “State Of Art” mixed Calcium Complex soap technology fortified with high viscosity base fluid and combine with unique polymers properties. Specially designed for application in Marine, Construction, Logging & Mining. The nature of its properties are an excellent grease for water corrosion environment, especially for marine application.

Excellent Corrosion Protection SPEC 266 It protects bearings and bushings against hostile contamination where seals are not provided or are impractical. Grease displaced from the bearings helps to reduce the intrusion of harsh environments. Prolong service life in extremely wet and corrosive environment.

Wide Temperature Operation SPEC 266 Because it’s low temperature limit is -50 °F (-45 °C); SPEC 266 may use it in cryogenic or low temperature applications. Typical uses are to lubricate ball and roller bearings, gears, screw actuators, electrical contacts, and as an assembly lube on O-rings, and other elastomers. At high-temperatures it can withstand 565°F (296 °C) for long periods of time, up to indefinitely. This makes it an ideal candidate for fill-for-life applications in the uses cited above. Oxidation & Thermal Stability SPEC 266 has its nature property in oxidation and thermal stability, which is ideal for seal for life bearings.

Resist Salt & Fresh Water Attacked SPEC 266 will not be affected by water due to the insolubility, it is used in any application that comes in contact with copious amounts of water, is unexcelled salt and fresh water wash out resistant, protect against corrosion. It protects bearings and bushings against hostile contamination where seals are not provided or are impractical. Grease displaced from the bearings helps to reduce the intrusion of harsh environments.

High Extreme Pressure Capability SPEC 266 blend with proprietor anti wear additives “SPEC-GX” which exhibit high load carrying capability, protect against high shock loading and extreme pressure operation, where a heavy load or extreme pressure is present, it is the grease of choice.


APPLICATION:

SPEC 266 can be used with confidence in heavy industries such as steel, and other metals, paper and forest products and mineral processing; as an all purpose on road, off-road heavy equipment lubricant for chassis points, shackle pins, king pins, ball joints, suspensions, rack and pinions, fifth wheel, universal joints, and wheel bearings. Provides excellent shock-load squeeze-out resistance of lubricant on equipment. SPEC 266 can be used in slow speed rolling element bearings (Low DN value), vertical and horizontal open bearing, couplings and splines, eccentrics, linear and oscillation mechanisms, ways, guides and cables as well as bushings, and hinge pins where a HIGH VISCOSITY lubricant will satisfy design parameters. Prevents welding and corrosion of bearings experiencing full load under static conditions and during equipment lay-up. Ideally suited for high horsepower pump and valve lubrication.

SPECIFICATION:

NLGI Grade # 2
Penetration worked 265-295
At 60 stroke
Viscosity;
100 °C (212 °F) 41
40 °C (104 °F) 560
Flash Point 288 °C (550 °F)
Dropping Point >296 °C (565 °F)
Water Washout, 1 hr. Nil ( Superior)
@ 79 °C, 600 RPM,
Timken OK Load 45 Lbs
Water Spray Off Test 5.8%
Rust Test Pass (Distilled Water
& Synthetic Water)
Four Ball Extreme 315
Pressure Weld Failure Load
Viscosity Index 120