SPEC 608 FOOD MAC OIL BOOSTER

A Highly Refined Food Grade FDA Oil Treatment

FEATURES:
· Extreme Pressure Protection
· USDA H1
· Friction Reducer
· Anti Oxidation Agent
· Reduce Oil Consumption
· High Tacky Oil Film
· Anti-wear and anti-corrosion

PRODUCT INFORMATION

SPEC 608 contain careful selected Extreme Pressure (EP) additives for food application purpose, these properties will impregnate the metal surface to reduce friction and lowers equipments temperature.

Anti Oxidation Agent is the ultimate factor for developing SPEC 608, which add into any industrial oil or engine oil for better oxidation resistant.

SPEC 608 is an excellent friction reducer, which promote unsurpassed anti-wear characteristic, it nature properties will protects against breaking down from shear and pumping action. Reduce friction and follow by energy saving (friction is the main factor for wear and generate more energy).

High Tackiness gives SPEC 608 applicable on many purposes, idea for many application like; slide way, chain lubrication, gears. SPEC 608 is semi liquid it easily penetrate into all type of chain’s pin and bush at the same time maintain a tough oil film to give continue lubrication non drip, withstand temperature range up to 260 °C (500 °F).

The tough thin film is idea for slide way, or any moving parts in food processing plant, where incidental food contact might happen. After countless time of dragging SPEC 608 leave a slippery surface for wear protection.

SPEC 608’s high molecular weight polymer help to increase Viscosity Index of industrial food grade oil, it give gear oil a strong adhesive and cohesiveness, it maintain a tough oil film on the gear set surface while the equipment idle for a long period, and provide the immediate lubrication from the first revolution of the gear move.

For reciprocating type of compressor, SPEC 608 will help to improve ring sealing action, especially for worn out piston, substantially reduce oil consumption, and prevent any oil leakage contamination in food processing plant, and greatly reduce noise.

TYPICAL SPECIFICATION:

Density @ 15 ºC, g/cm³……………………………………………………………0.8799
Density @ 30 ºC, g/cm³……………………………………………………………0.8704
ASTM Color……………………………………………………………………..<0.5
Appearance……………………………………………………………………….B & C
Viscosity @ 100 ºC………………………………………………………………. 596.4
Flash Point COC DEG ºC…………………………………………………………200 Min